- Lug wrench
- Jack and jack stands
- Socket wrench
- 17 mm socket
- Flathead screwdriver
- Hammer
Instructions
Step 1. Loosen the lug nuts on the front wheels.
Do not remove the lug nuts completely
Step 2. Jack up the front of the car and place it on jack stands.
Step 3. Remove the lug nuts and take off the front wheels.
Step 4. Use a flathead screwdriver to pry off the brake caliper guide pins.
Step 5. Remove the brake caliper from the rotor.
Step 6. Use a hammer to knock the rotor loose from the hub.
Step 7. Repeat steps 4 through 6 on the other side.
Step 8. Install the new rotors.
Step 9. Reinstall the brake calipers and guide pins.
Step 10. Replace the lug nuts and wheels, then lower the car.
Step 11. Tighten the lug nuts to 100 ft-lbs.
