- 10mm socket
- Ratchet
- Extension
- Flathead screwdriver
Instructions:
1. Park your truck in a safe location and turn off the engine.
2. Open the hood of your truck.
3. Locate the wiper linkage. It is located on the passenger side of the engine compartment, near the firewall.
4. Inspect the linkage for any damaged or worn parts.
5. If any parts are damaged or worn, they will need to be replaced.
6. To replace a damaged or worn part, remove the old part by unscrewing the nuts that hold it in place.
7. Install the new part by screwing the nuts back into place.
8. Tighten the nuts until they are snug.
9. Test the wipers to make sure they are working properly.
10. Close the hood of your truck.
Tips:
* If you are not comfortable performing this repair yourself, you can take your truck to a qualified mechanic.
* Be careful not to drop any nuts or bolts into the engine compartment.
