- Screwdriver
- 8 mm socket wrench
- Lightbulb replacement
- Replacement turn signal housing (if necessary)
Instructions:
1. Park your car in a safe location and turn off the engine.
2. Pop open the hood of your car.
3. Locate the turn signal housing on the front of your car.
4. Remove the two screws that hold the turn signal housing in place using a screwdriver.
5. Disconnect the electrical connector from the turn signal housing.
6. Remove the old turn signal bulb by turning it counterclockwise.
7. Insert the new turn signal bulb into the housing and turn it clockwise until it is secure.
8. Reconnect the electrical connector to the turn signal housing.
9. Replace the turn signal housing and secure it with the two screws.
10. Close the hood of your car.
If the turn signal housing is damaged or broken, you will need to replace it with a new one. To do this, simply follow the steps outlined above, but instead of reinstalling the old turn signal housing, install the new one.
Tips:
- When replacing the turn signal bulb, be careful not to drop it. If it does drop, it could shatter and the glass shards could cause injury.
- If the turn signal housing is broken or damaged, you can purchase a replacement at your local auto parts store.
- If you are uncomfortable performing this repair yourself, you can take your car to a qualified mechanic to have it done for you.
