* A screwdriver
* A putty knife
* A pair of pliers
* A new refrigerator door seal
1. Remove the old refrigerator door seal. Use a screwdriver to pry the old door seal off of the refrigerator door. Be careful not to damage the door or the seal.
2. Clean the door. Use a putty knife to scrape away any residual adhesive or dirt from the door.
3. Apply a new adhesive. Apply a thin bead of adhesive to the back of the new door seal.
4. Install the new door seal. Press the new door seal into place on the refrigerator door. Make sure that the seal is evenly seated.
5. Use pliers to tighten the screws. Use a pair of pliers to tighten the screws that hold the door seal in place.
Once you have completed these steps, the refrigerator door seal should be repaired.
