1. Purchase an immobilizer bypass module that is compatible with your vehicle.
2. Remove the ignition key from the vehicle and disconnect the battery.
3. Locate the immobilizer control unit (ICU), which is usually located under the dashboard.
4. Connect the bypass module to the ICU according to the instructions provided with the bypass module.
5. Reconnect the battery and insert the ignition key into the vehicle.
6. Start the engine. The immobilizer should now be bypassed.
Option 2: Disabling the immobilizer manually
1. Remove the ignition key from the vehicle and disconnect the battery.
2. Locate the ICU, which is usually located under the dashboard.
3. Open the ICU and locate the immobilizer chip.
4. Remove the immobilizer chip from the ICU.
5. Reconnect the battery and insert the ignition key into the vehicle.
6. Start the engine. The immobilizer should now be disabled.
Note: Disabling the immobilizer may compromise the security of your vehicle. It is recommended that you only bypass the immobilizer if you are experiencing problems with it and are unable to get it repaired.
