- A flathead screwdriver
- A Phillips head screwdriver
- A small hammer
- A pair of pliers
Instructions:
1. Open the trunk of your Jaguar S-Type.
2. Locate the fuse box on the left side of the trunk.
3. Remove the 10A fuse marked "Secondary Alarm".
4. Close the fuse box.
5. Start your car and verify that the secondary alarm is no longer sounding.
If the secondary alarm is still sounding, you may need to remove the alarm module itself. To do this, you will need to:
1. Remove the rear seat of your Jaguar S-Type.
2. Locate the alarm module on the left side of the trunk.
3. Disconnect the wiring harness from the alarm module.
4. Remove the mounting screws from the alarm module.
5. Remove the alarm module from the car.
Once the alarm module is removed, the secondary alarm should no longer be sounding.
