1. Park your car in a safe location and turn off the engine.
2. Open the hood of your car.
3. Locate the right front turn signal bulb.
- The right turn signal bulb is located behind the right headlight assembly.
4. Remove the right headlight assembly.
- To remove the headlight assembly, you need to use a 10mm socket to remove the two bolts that hold the assembly in place.
- Once you remove the bolts, pull the headlight assembly forward to remove it.
5. Remove the old turn signal bulb.
- Once you remove the headlight assembly, you can remove the turn signal bulb by twisting it counterclockwise.
- Use a twist and pull motion to remove.
6. Insert the new turn signal bulb.
- Insert the new turn signal bulb by twisting it clockwise.
7. Reinstall the right headlight assembly.
- To reinstall the headlight assembly, slide it into place and insert the two bolts that you removed in step 4.
- Tighten the bolts until they are snug.
8. Close the hood of your car.
*Note: Be sure to use a turn signal bulb that is the same type as the old bulb. You can find the bulb type printed on the side of the old bulb.*
