- Phillips head screwdriver
- Flat head screwdriver
- Pliers
- Wire cutters
- Drill
- 1/8 inch drill bit
- 3/16 inch drill bit
- 1/4 inch drill bit
- 5/16 inch drill bit
- 3/8 inch drill bit
- 1/2 inch drill bit
- 5/8 inch drill bit
- 3/4 inch drill bit
- 7/8 inch drill bit
- 1 inch drill bit
- Door panels
- Door panel clips
- Door panel screws
- Door panel weatherstripping
- Sound deadening material
Instructions:
1. Remove the old door panels. To do this, use a Phillips head screwdriver to remove the screws that hold the door panels in place. Then, use a flat head screwdriver to pry the door panels off of the door.
2. Remove the old door panel clips. Use a pliers to remove the old door panel clips from the door.
3. Remove the old door panel weatherstripping. Use a flat head screwdriver to pry the old door panel weatherstripping off of the door.
4. Install the sound deadening material. Cut the sound deadening material to fit the door. Then, peel off the backing paper and stick the sound deadening material to the door.
5. Install the new door panel weatherstripping. Cut the new door panel weatherstripping to fit the door. Then, peel off the backing paper and stick the new door panel weatherstripping to the door.
6. Install the new door panel clips. Install the new door panel clips into the door.
7. Install the new door panels. Place the new door panels onto the door and align the holes in the door panels with the holes in the door. Then, insert the screws through the holes and tighten them with a Phillips head screwdriver.
8. Test the door panels. Open and close the door panels to make sure that they are installed correctly.
