* Torx T30 Tamper-Resistant Screwdriver
Parts:
* Small, Flathead Screwdriver (Optional)
Instructions:
1.) Insert your key into the ignition and turn it to the “ON” position. (Do not start the engine.)
2.) Reach to the left of your steering wheel underneath your dashboard and pull down on the underside of your paneling using your fingers.
3.) Insert a small, flathead screwdriver into the seam (from step 2) to pry the paneling away from your dashboard. This should open up a small gap. Continue prying the paneling and pull your paneling off and away from your dash.
4.) Locate the 30 amp (yellow) fuse that controls the seatbelt chime and pull it out.
