Key:
* Battery: 12V battery
* CDI: Capacitive discharge ignition
* Coil: Ignition coil
* Engine: 50 cc 4-stroke engine
* Fuse: 10A fuse
* Generator: Alternating current generator
* Ground: Ground wire
* Headlight: 12V headlight
* Horn: 12V horn
* Ignition switch: Ignition switch
* Kill switch: Kill switch
* Spark plug: Spark plug
* Starter motor: 12V starter motor
* Tail light: 12V tail light
* Throttle: Throttle control
* Voltage regulator: Voltage regulator
Instructions:
1. Connect the positive terminal of the battery to the positive terminal of the CDI.
2. Connect the negative terminal of the battery to the ground wire.
3. Connect the positive terminal of the CDI to the positive terminal of the coil.
4. Connect the negative terminal of the CDI to the negative terminal of the coil.
5. Connect the positive terminal of the generator to the positive terminal of the voltage regulator.
6. Connect the negative terminal of the generator to the negative terminal of the voltage regulator.
7. Connect the positive terminal of the voltage regulator to the positive terminal of the battery.
8. Connect the negative terminal of the voltage regulator to the ground wire.
9. Connect the positive terminal of the starter motor to the positive terminal of the battery.
10. Connect the negative terminal of the starter motor to the ground wire.
11. Connect the positive terminal of the headlight to the positive terminal of the battery.
12. Connect the negative terminal of the headlight to the ground wire.
13. Connect the positive terminal of the horn to the positive terminal of the battery.
14. Connect the negative terminal of the horn to the ground wire.
15. Connect the positive terminal of the ignition switch to the positive terminal of the battery.
16. Connect the negative terminal of the ignition switch to the ground wire.
17. Connect the positive terminal of the kill switch to the positive terminal of the CDI.
18. Connect the negative terminal of the kill switch to the ground wire.
19. Connect the positive terminal of the spark plug to the positive terminal of the coil.
20. Connect the negative terminal of the spark plug to the ground wire.
21. Connect the positive terminal of the throttle to the positive terminal of the carburetor.
22. Connect the negative terminal of the throttle to the ground wire.
23. Connect the positive terminal of the tail light to the positive terminal of the battery.
24. Connect the negative terminal of the tail light to the ground wire.
Note: The wiring diagram shown is for a general 50 cc quad pocket bike. The wiring diagram for your specific model may vary slightly. Please consult your owner's manual for more information.
