Auto >> AutoSPT >  >> Autopilot

How do you start your Harley Davidson Fatboy?

To start a Harley Davidson Fatboy, follow these steps:

1. Insert the key into the ignition and turn it to the "On" position. The red security light will illuminate and then turn off after a few seconds.

2. Pull in the clutch lever. This will disengage the transmission from the engine.

3. Press the starter button. The engine will crank over and start.

4. Release the clutch lever slowly. The motorcycle will start to move forward.

5. Shift into first gear. Use the gearshift lever to select the appropriate gear for your speed.

6. Accelerate by twisting the throttle. The motorcycle will accelerate as you twist the throttle.

Here are some additional tips for starting a Harley Davidson Fatboy:

* If the engine is cold, you may need to use the choke. The choke is a lever located on the left side of the handlebars. Pull the choke out to engage it, and then release it gradually as the engine warms up.

* If the motorcycle is in gear, you will not be able to start it. Make sure that the motorcycle is in neutral gear before you try to start it.

* If the battery is dead, you will not be able to start the motorcycle. You can either jump-start the motorcycle or charge the battery.

Here is a video that demonstrates how to start a Harley Davidson Fatboy:

[Video: How to Start a Harley Davidson Fatboy](https://www.youtube.com/watch?v=n15xQmQ_j2A)