
Car seats can take a bit of a beating, with stains, mud, moisture and bad odours affecting how they look and feel. But whether you have leather seats or fabric, there are ways to keep them looking their best mile after mile.
In this guide, we offer practical tips on how to clean car seats, with step-by-step guidance on taking care of upholstery and leather.
Leather car seats are durable, hardwearing and practically stain-proof, making them easy to keep clean. However, because leather is a natural material, you will have to maintain the seats regularly to make sure the leather stays looking its best.

Here’s our step-by-step guide on how to clean and maintain leather car seats.
Tip – If you’re using a leather cleaner other than Simoniz, make sure that it’s suitable for the type and colour of the leather on your seats – because you don’t want to stain them! The great thing about our leather cleaner is that it’s suitable for use on all types and colours of leather, so you’ll always get great results.
Click here for more tips on how to take care of leather in your car
Upholstered cloth car seats are a little trickier to keep clean than leather. Any spills or dirt can easily stain the fabric, while they can also absorb bad odours and moisture. That said, with the right products, it’s easy to keep upholstered seats looking their best. Follow our guide below to find out the best products and techniques to use.

Clearing away dirt, dust and debris is the first step to a clean interior, and for that you’ll need a vacuum with plenty of pulling power. We’d always recommend using your standard vacuum where possible, as they have much more power than even the most advanced handheld car cleaners. Make sure you have plenty of attachment tools, too, as they’ll come in useful for cleaning those hard-to-reach areas.

Step 1 – Clear out larger bits of rubbish and remove the mats.
Step 2 – Use a brush head attachment to remove dust and dirt deep in the carpet fibres. If the carpet is heavily soiled, suction alone won’t do the trick, but the brush head should help stir up the bits for easy removal. Work the carpet in different directions to lift the dirt from the coiled fibres, being careful not to apply too much pressure which could spoil the finish.
Step 3 – While you’ve still got the brush head attached, go over the seats and any other areas of upholstery. Again, be careful not to apply too much pressure, or you risk scratching the fabric or leather.
Step 4 – Fix the nozzle tool to the vacuum and remove dirt and dust from those hard-to-reach crevices. Dirt tends to build up around the rim of the seat, in door cubby holes and around the gear stick, handbrake and control panel, and the crevice tool is great for clearing out these areas.
Step 5 – Vacuum each mat before placing it back in the car; this ensures that you won’t bring dirt and dust back into the car.
Step 6 – Don’t forget to vacuum out the boot too!
Additional tips – If your vacuum cleaner has a soft brush tool, this is great for cleaning dust from the dashboard, steering wheel and control panel; just be extra careful not to leave any marks or scratches. Also, if you notice dirt in a tiny crack or crevice, a can of compressed air is perfect for moving it quickly and safely.
At Simoniz, we offer you guaranteed shine with our range of interior and exterior car care products such as shampoo, wheel cleaners and dashboard cleaners. For more car care tips, head to the Simoniz blog for how-to advice and tips. To browse all our products, visit the homepage today.