If you want to replace the key fob of a new Dodge car, knowing the key fob programming becomes essential. But when there is no working key available, the situation becomes complex. The only thing you can do is learn how to program dodge key fob without a working one and perform the steps accordingly.
The procedure to program a Dodge key fob involves some simple steps that you can perform as per the following guideline.
If the key fob is not working, it becomes more difficult to program it. However, there is also a solution to this issue called Manual Programming Procedure that does not need a scan tool.
Step 1: Connect pin 1 or pin 4 of the 16-way data link connector to chassis ground.
Step 2: Shut all the vehicle doors and turn off the ignition key.
Step 3: Turn the ignition key to the Accessory position.
Step 4: Now is the time to turn off the ignition. As a result, door locks will cycle for one time in programming mode.
Step 5: For every key FOB, press any button three times in a row to execute the code programming.
Step 6: After the completion of the programming, the door locks cycle will take place once again.
Sometimes, the key fob battery is dead or has too low charge to function. In that situation, try this trick to open the Dodge vehicle doors:
The good news is, there will always be a hidden key inside the fob. To locate it, flip the fob to get to its opposite side and slide the switch of the top left corner to pull out the silver key. Now, this key can easily unlock the car doors.
Place back the key inside the key fob for its security purpose.
Push the start button with the Dodge key fob and press the brake with your feet.
If you are curious to know how to program dodge key fob without a working one, follow these steps. Thus, it should be an easy process to program a Dodge key fob. But it is also possible for the newbies to face a problem. In that case, take suggestions from the expert Dodge vehicle specialists.
