Modern fuel systems, even with today’s fuel, need some help to stay at peak performance. Diesel engines are no exception. Our Rislone Hy-per Diesel Complete Fuel System Treatment improves the quality of diesel fuel by increasing its cleaning ability, boosting cetane, adding lubrication, removing contaminants, fighting corrosion, and helping to prevent the fuel from gelling.
This one dual-cavity bottle contains the same number of additives equal to a bottle of regular fuel injector cleaner, upper cylinder lubricant, fuel stabilizer, anti-gel, diesel treatment and cetane booster. It’s literally six advanced additives in one bottle.
Part Number: 4740
Dosage: Use One Bottle Every 5,000 Miles
Size: 16.9 FL. OZ. (500 mL)
Rislone Diesel Fuel System Treatment improves the quality of diesel fuel by increasing its cleaning ability, adding lubrication, removing contaminants, fighting corrosion, and helping to prevent the fuel from gelling & going bad. Simply put, it is the best all in one diesel fuel additive money can buy.
It literally contains a combination of almost every type of diesel fuel additive on the market including injector & complete fuel system cleaner, anti-gel cold flow improver, fuel stabilizer & conditioner, Cetane booster & diesel treatment, ULSD sulfur substitute, and UCL pump & injector lubricant.
he UCL (Upper Cylinder Lubricant) additive lubricates the fuel pump, injectors and upper cylinder to reduce friction & wear, reducing noise.
This varies depending on the age of the vehicle, the quality of the fuel used, and how dirty the system is. It is normal for larger increases in MPG on the first dosage and then it will usually taper off and flatten out from the second dosage on. For best results use every 5,000 miles or with every oil change.
Yes, Rislone Hy-per Diesel Complete Fuel System Treatment is designed to work with all diesel engines and diesel fuels including ULSD Ultra Low Sulfur Diesel, Bio Diesel and off road Diesel Fuel.
No, this will not harm your engine or any emissions components including catalytic converters, particulate filters, EGR valve or DEF systems.
P/N 4740 / 16.9 ounce bottle – Use anytime in a nearly full tank, or add to tank and then fill with up to 35 gallons of diesel fuel. For smaller tanks from 10 to 18 gallons, use 1/2 bottle pouring equal amounts from each side. Larger tanks use one bottle for every 30 gallons of fuel
Typical numbers show a 1 to 2 point increase in Cetane level.
Typical results show up to 20°F (5°C) reduction in the Cold Filter Plugging Point (CFPP).
Yes, Rislone Hy-per Diesel Complete Fuel System Treatment is an excellent lubricant and will replace the lost additives in the newer reformulated diesel fuel.
The EZ Nozzle is the name for the patented spout attached to the bottle. This allows the product to be safely and easily poured into all fuel tanks, including diesels with misfueling device systems. Because it is designed like a regular diesel fuel nozzle you would see at your fuel station, it allows the product to work in all diesel vehicles.
Yes, this is safe to use and works in all domestic & import, car & truck regular, intercooled, turbo charged and directed injected diesel engines like the Ford PowerStroke, GM Duramax, Dodge Ram Cummins and all others.
Some diesel vehicles have a special fuel tank receptacle that only allows a fuel station nozzle the specific size for diesel to be installed in the vehicle. This prevents accidentally adding gasoline to the vehicle. But this also makes it much more difficult to use additives in those vehicles. The Rislone package contains a special spout which allows it to work in these vehicles.
Rislone® Hy-per Diesel™ Complete Fuel System Treatment improves the quality of Diesel fuel by increasing its cleaning ability, adding lubrication, removing contaminants, fighting corrosion, and helping to prevent the fuel from gelling & going bad. This one dual cavity bottle contains the same amount of additives equal to a bottle of regular injector & complete fuel system cleaner, anti-gel cold flow improver, fuel stabilizer & conditioner, Cetane booster & diesel treatment, ULSD sulfur substitute, and UCL pump & injector lubricant. Simply put, it is the best all in one diesel fuel additive money can buy.
Works with ALL: Ultra Low Sulfur Diesel (ULSD), Regular Diesel, Biodiesel Blends, Direct Injected (DI), Indirect Injected (IDI), Turbo Direct Injected (TDI), High-Pressure Common Rail (HPCR), and Turbocharged Engines.
Use with ALL: BlueTEC®, Cummins®, Duramax®, EcoDiesel®, Navistar®, PowerStroke®, TDI® CleanDiesel and many more.
Technical:
Note:
This product includes a specially designed spout which allows it to be poured into all fuel tanks, include those with misfuelling devices. Use anytime in a nearly full tank, or add to tank and then fill with up to 35 gallons of diesel fuel. For smaller tanks from 10 to 18 gallons, use 1/2 bottle pouring equal amounts from each side. Larger tanks use one bottle for every 30 gallons of fuel.
This diesel fuel additive complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road engines.
Directions:
Bend & twist spout and tear away on the perforated tab. Remove cap and foil seal. Tightly screw spout onto bottle. Gently tip bottle and complete insert spout into fuel tank opening, allow entire contents to empty into tank. For continued protection and cleaning, use one bottle every 5,000 miles. Results will either be immediate, or noticeable within 100 miles of driving.
To keep the system clean and lubricated in-between treatments, use Rislone Hy-per Fuel Injector Cleaner Upper Cylinder Lubricant part number 4701 (6 oz) or 4732 (32 oz).
Rislone products are available where auto parts are sold.
Read More
Read More
Read More
Don’t just take our word for it. Our customers have been using our products for decades.
If you have a story to tell, let us know.
“Worth Every Penny. I wanted to let you know I got the 2 part diesel fuel treatment and put in my 2016 Jeep Grand Cherokee Eco Diesel The Jeep has 21,000 miles and after burning 1/2 tank, I’ve noticed a big improvement in acceleration and horsepower. Love this product and plan to use again every 10,000 miles. Thanks Rislone.”
-R. Houston
>