1. Ensure that the vehicle is turned off and parked safely.
2. Open the rear doors of the vehicle.
3. Locate the two bolts that secure the rear seat to the floor of the vehicle. They are located at the base of the seat, near the center.
4. Remove these two bolts using a 13mm socket wrench.
5. Once the bolts are removed, lift up the rear seat cushion to remove it from the vehicle.
6. To remove the rear seatback, pull the release lever located on the side of the seatback and fold the seatback down.
7. Lift the seatback out of the vehicle.
Reinstallation:
1. To reinstall the rear seat, place the seatback into the vehicle and secure it using the release lever.
2. Place the rear seat cushion into the vehicle and ensure that the bolts are properly aligned with the holes in the floor.
3. Insert and tighten the two bolts that secure the rear seat to the floor of the vehicle.
4. Close the rear doors of the vehicle.
