Materials Needed:
1. New Rear Wiper Blade (Refer to your vehicle's owner's manual for the correct size)
2. Soft Cloth
3. Isopropyl Alcohol (optional, for cleaning)
Instructions:
1. Turn off the Engine: Make sure the vehicle's engine is turned off and the parking brake is engaged.
2. Lift the Rear Wiper Arm: Gently lift the rear wiper arm until it's almost perpendicular to the rear window.
3. Press the Release Button: Locate the release button on the wiper arm. It's usually a small button or lever. Press this button to release the wiper blade.
4. Remove the Old Wiper Blade: Slide the old wiper blade out of the hook or connector on the wiper arm.
5. Clean the Wiper Arm (optional): If the wiper arm is dirty, you can use a soft cloth dampened with isopropyl alcohol to clean it.
6. Insert the New Wiper Blade: Align the hook or connector of the new wiper blade with the wiper arm and slide it into place. Make sure the blade is seated securely.
7. Press the Release Button Again: Press the release button again to lock the wiper blade in place.
8. Lower the Rear Wiper Arm: Gently lower the wiper arm until it returns to its original position.
9. Test the Wiper: Turn on the rear wiper switch to test the new blade. Make sure it wipes the rear window effectively.
That's it! You have successfully replaced the rear wiper blade on your 2009 Toyota RAV4.
