Tools Needed:
- Phillips-head screwdriver
- Pry tool or flat-head screwdriver
- 10mm socket and ratchet
Instructions:
1. Remove the Door Lock Knob:
- Insert the flat-head screwdriver or pry tool into the small slot located at the base of the door lock knob.
- Gently pry the knob off the door panel.
2. Remove the Window Control Panel:
- Use a Phillips-head screwdriver to remove the two screws that secure the window control panel in place.
3. Disconnect the Electrical Connectors:
- Locate the electrical connectors behind the window control panel.
- Press the locking tabs on the connectors and disconnect them.
4. Remove the Door Panel Screws:
- Locate the screws that hold the door panel to the door frame.
- Use a Phillips-head screwdriver to remove these screws.
5. Remove the Door Panel:
- Use the pry tool or flat-head screwdriver to carefully pry the door panel away from the door frame.
- Start from the bottom of the panel and work your way up.
- Be careful not to damage the door panel or the door frame.
6. Disconnect the Speaker Wiring (if applicable):
- If the door panel has a speaker, you may need to disconnect the speaker wiring before completely removing the panel.
- Locate the speaker connector and press the locking tab to disconnect it.
7. Remove the Door Panel:
- Once all the screws are removed and the wiring is disconnected, you can lift the door panel off the door frame.
8. Reinstall the Door Panel:
- To reinstall the door panel, simply follow the steps in reverse.
- Make sure to reconnect the electrical connectors and secure the screws properly.
