1. Park your vehicle on level ground and turn off the engine. Allow it to cool down completely.
2. Locate the coolant reservoir. It is usually a translucent plastic tank with a black cap located near the front of the engine bay.
3. Remove the coolant reservoir cap by turning it counterclockwise.
4. Add a mixture of 50% antifreeze and 50% water to the coolant reservoir until the level is between the "MIN" and "MAX" marks.
5. Replace the coolant reservoir cap securely by turning it clockwise until it is tight.
6. Start the engine and let it run for a few minutes to circulate the antifreeze. Check the coolant level again and add more if necessary.
7. Monitor the coolant level regularly and add more as needed to keep it between the "MIN" and "MAX" marks.
Note: Always use a mixture of 50% antifreeze and 50% water to protect your vehicle's cooling system from freezing and overheating. Never add pure antifreeze to the coolant reservoir.
