- A Phillips head screwdriver
- A flat head screwdriver
- A 10mm socket wrench
- A 13mm socket wrench
- A ratchet
1. Begin by removing the plastic trim piece that covers the front of the seat. This can be done by removing the two screws that hold it in place.
2. Next, remove the two bolts that hold the seatbelt buckle to the seat.
3. Use the 13mm socket wrench to loosen the four bolts that hold the seat to the floor.
4. Once the bolts are loose, use the flat head screwdriver to pry up the seat from the floor.
5. Be careful not to damage the carpet when removing the seat.
6. Once the seat is removed, you can remove the seat belt buckle and the plastic trim piece.
