Here's a more specific breakdown:
* Location: Look for a roughly cylindrical-shaped device with wiring connected to it. It will be mounted near the bottom of the engine, close to where the transmission bolts on.
* Visual cues: The starter will likely be bolted to the bell housing itself, or to a bracket attached to the bell housing. You'll also notice wires coming from the starter, which connect to the battery and the ignition system.
Important Note: While the general location is consistent for most 1972 C10s, the exact positioning and mounting method can vary slightly based on engine type and specific modifications. If you're having trouble finding it, a repair manual specific to your truck's engine will provide detailed diagrams and instructions.
