However, here's a general overview of the process. Remember, this is NOT a substitute for your owner's manual and professional guidance.
Safety Precautions:
* Disconnect the negative battery terminal before starting any work. This prevents accidental sparks.
* Work in a well-ventilated area. Fuel fumes are flammable and hazardous.
* Wear safety glasses and gloves.
* Have a fire extinguisher nearby.
* Be prepared to relieve fuel pressure. This is crucial to prevent fuel spraying. The method for this varies depending on your specific Charger model (V6 or V8) and may involve using a fuel pressure release tool or a specific procedure outlined in your owner's manual. Improperly releasing pressure could lead to injury.
* Use clean rags or shop towels to soak up any spilled fuel.
General Steps (Consult your manual for specifics):
1. Locate the fuel filter. This is usually located near the fuel tank, often under the vehicle. The exact location will vary by model.
2. Release fuel pressure. This is the most critical and potentially dangerous step. Follow your owner's manual carefully.
3. Gather your tools. You'll need wrenches (likely 10mm and possibly others), shop rags, a container to catch spilled fuel, and possibly a fuel filter wrench.
4. Disconnect the fuel lines. Be prepared for a small amount of fuel to spill. Use rags to catch it. You'll likely need to loosen clamps or quick-connect fittings. Note which line goes where for reassembly.
5. Remove the fuel filter. This may require a filter wrench for easier removal.
6. Install the new fuel filter. Ensure it's oriented correctly.
7. Reconnect the fuel lines. Tighten clamps securely.
8. Reconnect the battery terminal.
9. Check for leaks. Start the engine and check for leaks around the fuel filter and lines.
10. Verify the system is working correctly. Check for any error codes and ensure your fuel gauge and engine performance are normal.
Again, this is a simplified overview and may not be entirely accurate for your specific 2006 Dodge Charger. Always refer to your owner's manual and consider seeking professional help from a qualified mechanic. Working with fuel systems is dangerous and requires proper knowledge and safety precautions. Don't attempt this if you're uncomfortable or unsure of any step.
