1. Cable Broken Inside the Cable Housing (Most Common): This is usually near the rear brakes themselves or somewhere along the cable's length. Unfortunately, this often requires replacing the entire cable. There's no easy way to repair a broken inner cable strand.
* Procedure (Requires replacing the cable): You'll need to access the cable at both ends. This usually involves removing parts of the rear brake system, possibly including the brake drums or calipers (depending on whether you have disc or drum brakes), and potentially removing sections of the interior trim to access the cable near the parking brake lever. The specific steps are complex and vary depending on whether your Tahoe has disc or drum brakes on the rear axle. A repair manual specific to your year and model is essential. You'll need to disconnect the cable from the lever and the brake caliper or drum mechanism, then install the new cable in reverse order.
2. Cable Broken at the Lever (Inside the Vehicle): Less common but possible. This might involve removing the center console or other interior trim to access the parking brake lever and cable connection. Again, a repair manual is crucial. Replacing the cable will likely be necessary.
3. Cable Broken at the Connection Point (Caliper or Drum): Similar to the above, you'll need to access the connection point, which means working on the rear brakes. Replacement of the cable is the solution.
Important Considerations:
* Safety First: Work on brakes should only be done with proper safety precautions. Use jack stands, never rely solely on a jack. Wear safety glasses.
* Repair Manual: A repair manual specific to your 2000 Chevy Tahoe is absolutely essential. It will provide detailed instructions, diagrams, and torque specifications. This is crucial to avoid further damage or injury.
* Tools: You will need various tools, including wrenches, sockets, screwdrivers, possibly a cable puller, and potentially a brake caliper tool.
* Professional Help: If you're not comfortable working on brakes, it's strongly recommended to take your vehicle to a qualified mechanic. Improper brake repair can be extremely dangerous.
In short: There's no quick fix for a broken parking brake cable. Replacing the cable is the solution, and doing so correctly requires mechanical knowledge and the right tools. Use a repair manual as your guide, and don't hesitate to seek professional help if needed.
