You have two outlets in your 2002 Chevy Malibu and neither are working after checking the fuses wires on back of what else could it be?

If you've checked the fuses and the wiring behind the outlets in your 2002 Chevy Malibu and neither outlet works, the problem likely lies within the vehicle's electrical system itself, and not simply with the outlets or their immediate wiring. Here are some possibilities:

* Power Supply Issue: The outlets might be getting power from a relay or a circuit breaker that's failed. This component could have gone bad and is preventing power from reaching the outlets.

* Wiring Harness Damage: A break or short in the main wiring harness supplying power to the outlets is a possibility. This is more likely if other electrical components near the outlets are malfunctioning.

* Ignition Switch Problem: Some vehicles have power outlets that only function when the ignition is in the "accessory" or "on" position. A faulty ignition switch might not be sending the necessary power signal.

* Radio/Navigation Unit: In some vehicles, power outlets are connected to or controlled by the radio or navigation unit. If that unit is malfunctioning, it might affect the power outlets.

* Body Control Module (BCM) malfunction: The BCM is the brain of many vehicle's electrical systems. A faulty BCM can cause a range of issues, including non-functioning power outlets. This is less likely, but possible.

Troubleshooting Steps:

1. Check the Owner's Manual: Consult your owner's manual to see if there is a diagram of the electrical system or troubleshooting guide specific to the power outlets.

2. Test for Power at the Outlets: Use a multimeter to test for voltage at the power outlets. Make sure the ignition is in the "accessory" or "on" position, if applicable. If there's no voltage, the problem is upstream of the outlets.

3. Check Related Electrical Components: Are other components in the same area working properly? This might point to a problem with the wiring harness in that region.

4. Professional Diagnosis: If you're not comfortable working with car wiring, it's best to take your Malibu to a qualified mechanic or auto electrician. They have the tools and expertise to diagnose the problem accurately and efficiently. They can use advanced diagnostic tools to pinpoint the issue, whether it's a faulty relay, a broken wire, or a more complex problem with the BCM or other control units.

Remember to disconnect the negative battery terminal before working with any vehicle's electrical system to prevent injury or damage.