Engines: The 1979 Suburban typically offered several V8 engine choices:
* Small Block: Commonly a 350 cubic inch (5.7L) V8, producing around 170-180 horsepower. This was a popular choice.
* Big Block: A 400 cubic inch (6.6L) V8 was also available, offering more power but reduced fuel economy. Less common than the 350.
* Diesel: A 350 cubic inch (5.7L) diesel V8 was an option, offering better fuel economy but less power than the gasoline counterparts.
Transmission: Typically a 3-speed automatic or a 4-speed manual transmission was available.
Drivetrain: Always a four-wheel-drive (4x4) or two-wheel-drive (2WD) configuration. The 4x4 system was a part-time system.
Suspension: Solid front axle and leaf springs in the rear, common for trucks of that era.
Brakes: Front disc brakes were likely optional; rear brakes were drum brakes.
Dimensions (approximate, varied slightly by trim and wheelbase):
* Length: Around 19-20 feet (depending on wheelbase)
* Wheelbase: Several options were available, leading to variations in overall length.
* Payload capacity: Varied significantly depending on configuration, but could be in the tons range.
* Passenger capacity: Typically 8 or 9 passengers.
Other Features: Features would vary greatly depending on the trim level and options selected. Features could include air conditioning, power steering, power brakes, and various interior and exterior trim options.
To find the exact specifications of a particular 1979 Chevy Suburban, you would need to know:
* The specific trim level (Cheyenne, Scottsdale, etc.): This impacts engine options and some features.
* The VIN (Vehicle Identification Number): This allows one to decode the build sheet at places like GM Heritage Center or third-party VIN decoding services. This will give you the most precise specifications for *that specific vehicle*.
Without this specific information, the above is a generalization of the available options for a 1979 Chevy Suburban.
