1. A working key fob.
2. A blank key fob that is compatible with your vehicle.
3. A screwdriver.
4. A pen or pencil.
Instructions:
1. Insert the working key fob into the ignition and turn it to the "ON" position.
2. Within 10 seconds of turning the key to "ON", press and hold the "LOCK" and "UNLOCK" buttons on the working key fob simultaneously for at least 5 seconds.
3. You will hear a chime, indicating that the vehicle is in programming mode.
4. Within 20 seconds of hearing the chime, press the "LOCK" or "UNLOCK" button on the blank key fob.
5. You will hear a second chime, indicating that the new remote has been programmed successfully.
6. Test the new remote to ensure that it is working properly.
7. Repeat steps 2-6 to program additional remotes.
Note: If you do not hear a chime after pressing and holding the "LOCK" and "UNLOCK" buttons for 5 seconds, repeat steps 2-6 until you hear the chime.
