- A flat-head screwdriver
- A Phillips-head screwdriver
- A socket wrench
- A 10mm socket
- A 12mm socket
- A 14mm socket
- A ratchet
Instructions:
1. Open the hood of your car.
2. Locate the four screws on the top of the bumper, two on each side.
3. Use the Phillips-head screwdriver to remove these screws.
4. Locate the four screws on the bottom of the bumper, two on each side.
5. Use the Phillips-head screwdriver to remove these screws.
6. Locate the six bolts that hold the bumper to the front of the car.
7. Use the 10mm socket and ratchet to remove these bolts.
8. Once all of the screws and bolts have been removed, you can start to pull the bumper off the car.
9. Be careful not to damage the paint or the headlights.
10. Once the bumper is off, you can disconnect the turn signal lights and the fog lights.
To reinstall the bumper, simply follow these steps in reverse order.
