*Towbar wiring kit
*Crimping tool
*Wire strippers
*Electrical tape
Tips:
*If you are not familiar with electrical work, it is best to have a professional install the towbar wiring.
*Make sure that the towbar wiring kit you purchase is compatible with your Toyota Estima.
*Follow the instructions in the wiring kit carefully to ensure a proper installation.
*Test the towbar wiring before you use it to ensure that it is working properly.
Here are the steps to wire a towbar for Toyota Estima:
1. Disconnect the negative terminal of the battery.
2. Locate the connector for the towbar wiring kit behind the rear bumper.
3. Connect the red wire from the wiring kit to the positive terminal of the battery.
4. Connect the black wire from the wiring kit to a good ground point on the frame of the vehicle.
5. Connect the green wire from the wiring kit to the left turn signal wire.
6. Connect the yellow wire from the wiring kit to the right turn signal wire.
7. Connect the brown wire from the wiring kit to the tail light wire.
8. Connect the white wire from the wiring kit to the reverse light wire.
9. Reconnect the negative terminal of the battery.
10. Test the towbar wiring to ensure that it is working properly.
