- The reservoir is usually located on the passenger side of the engine compartment, near the front of the vehicle.
- It is typically a clear or translucent plastic bottle with a black cap.
2. Remove the cap from the power steering fluid reservoir.
3. Add the fluid to the reservoir using a funnel.
- The amount of fluid you need to add will vary depending on the vehicle, so check your owner's manual for the specific amount.
4. Replace the cap on the power steering fluid reservoir.
5. Start the engine and let it run for a few minutes.
- This will help circulate the new fluid throughout the power steering system.
6. Check the fluid level again and add more fluid if necessary.
