Auto >> AutoSPT >  >> Electric car

How do you replace an air filter on a 1994 Subaru Legacy station wagon?

Replacing the Air Filter on a 1994 Subaru Legacy Station Wagon

1. Locate the air filter housing. The air filter housing is located on the passenger side of the engine compartment, near the front of the car. It is a black plastic box with a hose connected to it.

2. Remove the air filter housing cover. There are two clips that hold the cover in place. Use a flathead screwdriver to pry the clips open and remove the cover.

3. Remove the old air filter. The old air filter is located inside the housing. It is a rectangular piece of paper with a metal frame. Pull the air filter out of the housing.

4. Inspect the air filter. Check the air filter for dirt, debris, and damage. If the air filter is dirty, it needs to be replaced.

5. Install the new air filter. Place the new air filter in the housing. Make sure that the air filter is seated properly.

6. Replace the air filter housing cover. Snap the cover back into place. Make sure that the clips are secure.

7. Start the engine. Let the engine run for a few minutes. This will allow the new air filter to settle into place.

Here are some tips for replacing the air filter on a 1994 Subaru Legacy station wagon:

* Be careful not to drop the air filter into the engine compartment.

* If the air filter is dirty, it may be necessary to clean the air filter housing.

* The air filter should be replaced every 12,000 miles or once a year, whichever comes first.