- Spark plug socket wrench
- Extension bar
- Spark plugs
- Ratchet
Instructions:
1. Locate the spark plugs. They are located on the top of the engine, near the front.
2. Remove the spark plug wires.
- Use a spark plug socket wrench or pliers to grip the wire connector attached to the spark plug and pull it straight off.
-Be careful not to damage the wires or connectors, take off the wires one by one.
3. Remove the old spark plugs .
- Use the extension bar to loosen and remove the spark plug from the engine.
4. Install the new spark plugs .
- Screw in the new spark plug by hand until it is snug.
- Use the wrench or ratchet to tighten the plug securely.
5. Reconnect the spark plug wires.
- Replace and reconnect the spark plug wires in the same order they were removed.
6. Start the engine and check for proper operation.
