1. Make sure you have a fully charged battery.
2. Check your fuel line for leaks or blockages.
3. Make sure your spark plugs are in good condition and properly gapped.
4. Ensure your choke is properly adjusted.
5. Push the accelerator pedal to the floor and hold it there. This will set the choke.
6. Pump the gas pedal a few times to prime the fuel lines.
7. Turn the key and start the engine.
8. If the engine does not start, repeat steps 5-7.
9. If the engine still does not start, you may need to use starting fluid.
10. To use starting fluid, spray a small amount into the air intake while cranking the engine.
*Note: Starting fluid is a flammable liquid and should be used with caution. Only use starting fluid if all other methods have failed, and ensure that the area is well-ventilated.*
