Auto >> AutoSPT >  >> Electric car

How do you flat tow a 2011 fiesta with automatic transmission?

Tools Needed:

-Tow bar with safety cables and hooks

- Baseplate

- Wiring kit(optional)

- Supplemental braking system(optional)

Preparations:

1. Engine Preparations:

- Check your owner's manual to ensure your vehicle can be flat towed.

- Fill the gas tank to at least 1/4 tank to ensure adequate fuel supply for the transmission and engine.

- Disconnect the negative terminal of the battery.

- Insert the key into the ignition and turn it to the "Accessory" position. This will unlock the steering wheel and allow the wheels to turn freely.

- Put the transmission into "Neutral."

2. Setting up the Tow Bar:

- Attach the tow bar to your vehicle's baseplate.

- Secure the safety cables to the tow vehicle and the baseplate on your Fiesta.

- Plug the wiring kit into your vehicle's electrical system (Optional)

3. Supplemental Braking System (Optional)

- If required by law or for your safety, install and properly calibrate a supplemental braking system.

Flat Towing:

1. Tow Vehicle Requirements:

- Ensure that your tow vehicle is equipped with a tow hitch and the appropriate towing capacity for your Fiesta.

2. Loading:

- Drive your Fiesta onto a flatbed trailer or into the car carrier of your tow vehicle.

- Secure the Fiesta in place using tie-down straps or chains.

3. Safety Measures:

- Double-check all connections, including safety cables, wiring kit(if installed), and tie-down straps.

- Test the lights and brakes before beginning your journey.

- Follow all traffic laws and regulations when towing.

- Consider the added length and weight of the Fiesta when maneuvering and stopping.

- Periodically check on your Fiesta and make any necessary adjustments during your trip.

Unloading:

1. Preparation:

- Bring the tow vehicle to a complete stop and put it in "park"

- Release the tie-down straps or chains and carefully remove your Fiesta from the trailer or car carrier.

- Reconnect the negative battery terminal.

2. Testing:

- Start your Fiesta and make sure all lights and brakes are functioning correctly.

- Test drive the Fiesta to ensure everything is operating smoothly.

After flat towing your 2011 Fiesta, refer to your owner's manual for further instructions on post-towing maintenance or procedures.