Where is the alarm on 97 jeep grand Cherokee limited and how do you disconnect alarm?

The alarm on a 1997 Jeep Grand Cherokee Limited is located in the driver's side kick panel. To disconnect the alarm, you will need to remove the kick panel and locate the alarm module. The alarm module is a small black box with a red wire coming out of it. To disconnect the alarm, you will need to cut the red wire. Once the red wire is cut, the alarm will be disconnected.

Here are the steps on how to remove the kick panel and disconnect the alarm:

1. Open the driver's door.

2. Remove the two screws that hold the kick panel in place.

3. Pull the kick panel off.

4. Locate the alarm module.

5. Cut the red wire coming out of the alarm module.

6. Reinstall the kick panel.

Please note that disconnecting the alarm will also disable the keyless entry system.