1. Locate the battery compartment:
The battery compartment of your watch may be located on the back of the watch case. To find it, simply look for a small, round, or rectangular opening.
2. Prepare your tools:
You will need a small, flat-head screwdriver or a watchmaker's tool to pry open the battery compartment. Be sure to use a tool that is small enough to fit into the opening.
3. Pry open the battery compartment:
Gently insert the tip of your tool into the opening and pry it open. Be careful not to damage the surrounding area or the battery inside.
4. Remove the old battery:
Once the compartment is open, carefully remove the old battery. Use caution as the battery may be loose and might roll away.
5. Insert the new battery:
Position the new battery with its positive (+) side facing up. Gently press the battery into the compartment until it is firmly seated.
6. Close the battery compartment:
Align the battery compartment cover with the watch case and press down on it until it snaps into place.
7. Test the watch:
Finally, test the watch by pressing the button to see if it works correctly. If it does, your battery replacement was successful!
Remember to dispose of the old watch battery properly. Watch batteries contain harmful materials, so it is essential to recycle them rather than throwing them away. Check with your local battery recycling center or waste management facility for instructions on how to properly dispose of watch batteries in your area.
