- 1x chassis (can be made from wood or plastic)
- 2x wheels (with axles long enough to fit through chassis)
- 1x motor
- 1x battery pack (with connector)
- 1x switch (two-position)
- 1x electrical wire (enough to connect motor, battery pack, and switch)
- Various small parts (screws, nuts, bolts, etc.)
Tools:
- Soldering iron
- Wire cutters
- Pliers
- Screwdriver
- Wrench
Instructions:
1. Assembly the chassis:
- If you are using wood, you will need to cut and join the pieces to form the chassis.
-If using plastic, you may need to bend or shape the piece to form the chassis.
2. Mount the wheels:
- Attach the axles to the chassis.
-Slide the wheels onto the axles.
- Secure the wheels in place with nuts or bolts.
3. Mount the motor:
-Position the motor on the chassis (it should be centered or slightly offset to one side).
- Attach the motor to the chassis using screws or bolts.
4. Connect the battery pack and the switch:
- Solder a wire to the positive terminal of the battery pack and connect the other end of the wire to one terminal of the switch.
- Solder a wire to the negative terminal of the battery pack and connect the other end of the wire to the other terminal of the switch.
5. Connect the motor:
- Solder one end of a wire to one of the terminals on the motor.
- Solder the other end of the wire to the center terminal of the switch.
6. Test the toy car:
-Turn on the switch and make sure that the motor spins.
-If the motor does not spin, check the wiring to make sure that it is correct.
7. Add any desired decorations:
-You can add decals, paint, or other decorations to the toy car to make it more personalized.
