1. Open the Hood:
- Make sure the engine is cool and off.
- Locate the hood release inside your car and open the hood.
2. Identify the Washer Fluid Reservoir:
- Look for a semi-translucent plastic container near the front of the engine bay.
- It's typically filled with blue or green-colored washer fluid.
3. Trace the Hoses:
- There should be two hoses connected to the bottom of the washer fluid reservoir.
- Follow these hoses towards the bottom of the car.
4. Locate the Washer Pump:
- The washer pump is usually mounted near the bottom of the washer fluid reservoir, close to the front of the car.
- It's typically a small cylindrical device, often black or gray.
5. Confirm Connections:
- Ensure the hoses from the washer fluid reservoir are properly attached to the washer pump.
- There might also be a wiring harness connected to the washer pump.
6. Access the Washer Pump:
- You may need to remove some plastic covers or components to access the washer pump.
- Please pay attention to how these components are attached, so you can reassemble them correctly.
7. Disconnect and Remove:
- Once you've reached the washer pump, disconnect any electrical connectors attached to it.
- Then, unclip or remove the hoses that connect the washer pump to the reservoir and the windshield washer jets.
- Be prepared for some washer fluid to drip.
8. Secure and Reassemble:
- Take out the old washer pump and install the new one.
- Reconnect the hoses, electrical connectors, and covers you removed during the process.
- Make sure everything is secure.
9. Test the Washer Pump:
- Turn on the windshield wipers.
- The washer pump should activate, spraying washer fluid onto your windshield.
Remember that the specific location of components may vary slightly depending on the exact year and model of your Citroen Xsara Picasso. If you're not comfortable working on your vehicle's components, it's advisable to consult a professional mechanic for assistance.
