Auto >> AutoSPT >  >> Electric car

How do you program a BMW alarm remote?

To program a BMW alarm remote, you will need the following items:

* A BMW alarm remote

* A working BMW key

* A phillips-head screwdriver

Instructions:

1. Insert the working BMW key into the ignition and turn it to the "ON" position.

2. Press and hold the "UNLOCK" button on the alarm remote for at least 5 seconds.

3. While still holding the "UNLOCK" button, press the "LOCK" button on the alarm remote once.

4. Release both buttons.

5. The alarm remote should now be programmed.

To test the alarm remote, point it at the car and press the "LOCK" button. The car should lock and the alarm should activate.

Auto Repair
How do you adjust the rear parking brake on a 1993 mark viii? How do you refill rear window washer on 1996 ford explorer?
Car Care
Pedestrian Deaths in the U.S. on the Rise DIY Corner – Engine Oil Change Diesel Particulate Filter (DPF): What You Need to Know
Engine
How do you adjust the fuel mixture rich or weak for a daewoo matiz 800? How do you put the alternator belt back on a 97 maxima after replacing alternator?
Electric Car
Will the boot cover from an 02 sebring convertible fit 05? 91 Camaro rs will not idle? 2004 Chrysler PT Cruiser knocking noise in the rear of vehicle when going over bumps?
Autopilot
Day 12 Capability: React to lead vehicle braking How do I get weapons and characters on Pivot Stick Figure Animator?
Car Photos
How do you install a Chevy front bumper? WHAT HAPPEN TO THE 66 FORD FAIRLANE GT? You are driving in the middle lane on a three expressway. A car begins to pass you right. The actions of that driver wrong?