* Phillips head screwdriver
* Flat head screwdriver
* Socket wrench set
* Pliers
* New headlight bulbs (H4)
* Electrical tape
Step 1: Park the car on a flat surface and turn off the engine. Allow it to cool down.
Step 2: Open the hood of the car.
Step 3: Locate the headlight assemblies on the front of the car. They are located on either side of the grille and held in place by several bolts and screws.
Step 4: Use the Phillips head screwdriver to remove the screws holding the headlight assemblies in place.
Step 5: Use the flat head screwdriver or pliers to carefully pry the headlight assembly from the car. Be careful not to damage the paint or the electrical wiring.
Step 6: Unplug the electrical connector from the back of the headlight assembly.
Step 7: Remove the old headlight bulb by turning it counterclockwise and pulling it out of the socket.
Step 8: Install the new headlight bulb by inserting it into the socket and turning it clockwise until it is secure.
Step 9: Plug the electrical connector back into the back of the headlight assembly.
Step 10: Place the headlight assembly back into the car and secure it with the screws you removed in Step 4.
Step 11: Repeat Steps 4-10 for the other headlight assembly.
Step 12: Test the headlights to make sure they are working properly.
Step 13: Close the hood of the car.
Step 14: Enjoy your newly installed headlights!
