- 10mm socket
- 13mm socket
- 15mm socket
- Socket wrench
- Extension
- Oil drain pan
- New oil filter
- New oil pan gasket
- RTV silicone sealant
Instructions
1. Loosen the oil drain plug and drain the oil.
2. Remove the 10mm bolts that secure the skid plate to the frame.
3. Remove the skid plate.
4. Remove the 13mm bolts that secure the oil pan to the block.
5. Gently pry the oil pan off of the block using a pry bar.
6. Clean the mating surfaces of the oil pan and the block.
7. Apply a thin layer of RTV silicone sealant to the oil pan gasket.
8. Install the new oil pan gasket.
9. Reinstall the oil pan and secure it with the 13mm bolts.
10. Reinstall the skid plate and secure it with the 10mm bolts.
11. Replace the oil drain plug.
12. Add new oil to the engine.
13. Start the engine and let it run for a few minutes.
14. Check for leaks.
