1. Insert a flat-bladed screwdriver into the slot on the right side of the stereo fascia.
2. Gently pry the fascia away from the stereo.
3. Repeat steps 1 and 2 on the left side of the stereo fascia.
4. There are four spring-loaded clips connecting the stereo fascia to the mounting brackets. Disconnect the clips on the left and right sides of the fascia.
5. Remove the fascia to expose the stereo.
6. Remove the four screws that secure the stereo to the mounting brackets.
7. Disconnect the wiring harness from the stereo.
8. Remove the stereo from the vehicle.
