1. Make sure the other car you're using to jump start is running.
2. Connect one end of the jumper cables to the positive terminal (+) on the dead battery of your Range Rover.
3. Connect the other end of the same jumper cable to the positive terminal (+) on the jump-start vehicle.
4. Connect one end of the other jumper cable to the negative terminal (-) on the jump-start vehicle.
5. Connect the other end of the negative jumper cable to an unpainted metal surface on the engine of your Range Rover (not near the battery) to act as a grounding point.
6. Start the jump-start vehicle and let it run for a few minutes. This will help to charge up the dead battery in your Range Rover.
7. Try to start your Range Rover. If it starts, let it run for a few more minutes to recharge the battery.
8. Once the battery is sufficiently recharged, disconnect the jumper cables in the reverse order of how they were connected. Start with the negative cable first.
Remember that jump-starting a vehicle is only a temporary solution. It's recommended that you have the battery checked and replaced if necessary.
