1. Turn the ignition key to the "On" position, but do not start the engine.
2. Press and hold the brake pedal for at least 10 seconds.
3. Release the brake pedal and turn off the ignition.
Wait 10 seconds, then turn the key to the "On" position again. The ABS and brake lights should now be reset.
Possible Solution 2
1. Disconnect the negative battery cable for at least 30 minutes.
2. Reconnect the negative battery cable.
3. Turn the ignition key to the "On" position, but do not start the engine.
4. Press and hold the brake pedal for at least 10 seconds.
5. Release the brake pedal and turn off the ignition.
Wait 10 seconds, then turn the key to the "On" position again. The ABS and brake lights should now be reset.
