To run the wires, you will need to find the distributor cap and remove it. The distributor cap is located on the front of the engine, and it is held in place by a few bolts. Once the distributor cap is removed, you will see the spark plug wires. The spark plug wires are connected to the distributor cap in a specific order. The firing order is stamped on the distributor cap, so you can use it as a guide to connect the wires.
To connect the spark plug wires, simply push them onto the spark plugs and the distributor cap. Make sure that the wires are firmly seated in place. Once the wires are connected, you can reinstall the distributor cap.
Before you start the engine, you should also check to make sure that the timing belt is properly tensioned. The timing belt is a crucial component of the engine, and it must be properly tensioned to ensure that the engine runs correctly. If you are unsure how to tension the timing belt, you should consult with a qualified mechanic.
Once you have checked the timing belt, you can start the engine. If the engine starts and runs smoothly, then you have successfully connected the spark plug wires.
