Step 1: Remove the old ceiling liner
1. Use the Phillips head screwdriver to remove the screws that hold the ceiling liner in place.
2. Once the screws are removed, use the flat head screwdriver to pry the ceiling liner loose from the car.
3. Be careful not to damage the ceiling liner when removing it.
Step 2: Clean the surface
1. Use the putty knife to scrape away any old adhesive or dirt from the surface of the car.
2. Be sure to clean the surface thoroughly so that the new adhesive will bond properly.
Step 3: Cut the new ceiling liner
1. Measure the area where the ceiling liner will be installed.
2. Cut a piece of cardboard to the same size as the area you measured.
3. Use the cardboard as a template to cut the new ceiling liner.
Step 4: Install the new ceiling liner
1. Apply a thin layer of spray adhesive to the back of the new ceiling liner.
2. Carefully position the ceiling liner in place and press it firmly against the surface of the car.
3. Use the pliers to hold the ceiling liner in place while the adhesive dries.
Step 5: Replace the screws
1. Once the adhesive has dried, replace the screws that hold the ceiling liner in place.
2. Be sure to tighten the screws securely.
Step 6: Enjoy your new ceiling liner!
Your new ceiling liner should now be securely in place. Enjoy your new car interior!
