To access the heater core, you will need to remove the following:
- Glove compartment
- Center console
- Heating and air conditioning control panel
- Blower motor
- Evaporator core
Once the above components are removed, you will be able to access the heater core. It is important to note that the heater core is a sealed unit, and it is not possible to repair it. If it is faulty, it will need to be replaced.
Here are the steps to remove a heater core from a Jeep Liberty:
1. Disconnect the negative battery cable.
2. Drain the coolant from the radiator.
3. Remove the heater hoses from the heater core.
4. Remove the mounting screws and remove the heater core from the vehicle.
To install a new heater core, simply reverse the steps above. Be sure to fill the cooling system with coolant and reconnect the negative battery cable when finished.
