2. Disconnect the electrical connector from the blower motor.
3. Remove the mounting screws that hold the blower motor in place. There will likely be two or three screws.
4. Remove the blower motor. Take care not to drop the blower motor into the dash.
5. Locate the blower motor resistor. It is usually located near the blower motor. It will be a small, rectangular device with two or three electrical connectors.
6. Disconnect the electrical connectors from the blower motor resistor.
7. Remove the mounting screws that hold the blower motor resistor in place. There will likely be one or two screws.
8. Remove the blower motor resistor.