2. Locate the tail light assembly. It is held in place by two screws.
3. Remove the screws.
4. Pull the tail light assembly out of the car.
5. Remove the bulb from the socket.
6. Insert the new bulb into the socket.
7. Reinstall the tail light assembly.
8. Tighten the screws.
9. Close the trunk.
Here are some additional tips:
* If you have difficulty removing the screws, you can use a screwdriver or a drill.
* Be careful not to drop the screws.
* If you have difficulty removing the tail light assembly, you may need to use a pry bar.
* Be careful not to damage the tail light assembly.
* If you have any questions, consult your vehicle owner's manual or a qualified mechanic.
