1. Park your vehicle in a safe location and turn off the engine.
2. Open the trunk.
3. Locate the turn signal assembly. It is located in the rear of the trunk, on the side that the turn signal is not working.
4. Remove the two screws that hold the turn signal assembly in place.
5. Disconnect the electrical connector from the turn signal assembly.
6. Remove the turn signal assembly from the vehicle.
7. Install the new turn signal assembly in reverse order of removal.
8. Test the turn signal to make sure it is working properly.
- If you are not comfortable performing this repair yourself, you can take your vehicle to a mechanic.
- You may need to purchase new screws if the old screws are damaged.
- Be careful not to drop the turn signal assembly.
- If you have any questions, consult your vehicle's owner's manual.
- Replacement turn signal assembly
- Two new screws (optional)
