Which coil pack do i replace on 2004 Ford Taurus se with 3.0 duratec engine when computer code says no. 3 cyl misfiring?

To replace the correct ignition coil pack on a 2004 Ford Taurus SE with a 3.0 Duratec engine when the computer code indicates a misfire in cylinder number 3, you should follow these steps:

1. Locate the ignition coil pack.

- Open the hood of the vehicle and locate the engine.

- The ignition coil packs are located on top of the engine, arranged in a row.

- Each coil pack is connected to a specific spark plug.

2. Identify the coil pack for cylinder number 3.

- The ignition coil packs are numbered from front to back, with cylinder number 1 being the closest to the front of the engine.

- The ignition coil pack for cylinder number 3 will be the third one in the row.

3. Replace the ignition coil pack.

- Disconnect the electrical connector from the ignition coil pack.

- Remove the bolt that holds the ignition coil pack in place.

- Remove the ignition coil pack.

- Install the new ignition coil pack in the reverse order of removal.

Please note that before starting, it is recommended to consult your vehicle's owner's manual or refer to a reputable automotive service provider if you are not comfortable performing this repair yourself. Additionally, take extra safety precautions when working on the engine's electrical components.