If you want to disable the daytime running lights on your 1999 Chevy S-10, you will need to follow these steps:
Disclaimer: This procedure requires working with electrical components and should be performed by a qualified individual. Disconnect the battery before attempting any electrical work.
1. Open the hood of your S-10.
2. Locate the daytime running light relay. It is usually located in the underhood fuse block, but may be in a different location depending on your specific model. The relay should be labeled "DRL" or "Daytime Running Lights".
3. Remove the daytime running light relay by gently prying it up and out of its socket.
4. Tape off or insulate the relay terminals to prevent them from shorting out. This is important to prevent potential damage to your vehicle's electrical system.
5. Close the hood of your S-10 and test to make sure the daytime running lights are now disabled.
Note: Disabling your daytime running lights may affect your vehicle's safety and visibility, and may also make your vehicle non-compliant with certain regulations. Refer to your vehicle's owner's manual for more information and consider seeking advice from a qualified automotive technician before proceeding.
